MAINTENANCE, STORAGE AND TRANSPORTATION
114
1
Upper engraved line
2
Lower engraved line
3
Oil filler cap
6. After cleaning the oil dipstick, fully insert it again.
7.
If the oil level is near or below the lower level mark, remove the
seat. (see page 107). Remove the oil fill cap
3
from the front
right crankcase cover and add the specified oil into the fill cap
hole up to the upper level mark on the dipstick.
8. Reinstall the oil fill cap and dipstick.
9. Install the tank cover assembly.
10. Install the seat.
