MAINTENANCE, STORAGE AND TRANSPORTATION
118
1
Bolt M6*25*8
2
Strainer cover
3
O-rings seal
4
Strainer spring
5
Oil strainer
The oil filter can be checked after the oil is discharged. If cleaning
is needed, please take the following steps:
1.
Remove 4 bolts with tools.
2. Remove the strainer cover, O-ring seal and strainer spring in
turn.
3. Take out the oil strainer for cleaning.
4. The installation step is opposite to the removal step.
Oil filter change
This procedure requires mechanical skill and professional tools
such as a torque wrench as well as a means for disposing of the
drained fluid. If you do not have the skills or the tools, see your
dealer.
Check the fluid recommendation table for capacities and plug
torques. Always change the oil filter at the same time when
changing the oil.