MAINTENANCE, STORAGE AND TRANSPORTATION
119
1
Screw
2
Oil filter inspection cover
3
Oil filter
1. Remove the fixing screws of the filter inspection cover and
open the filter inspection cover.
You can see the black cover.
The oil filter is located here. Put the towel under the oil filter.
2. Change a new O-shaped ring onto a new oil filter, inspect and
make sure the O ring is in good condition.
3. Remove the oil filter to be replaced by the tool counter-
clockwise.
Rotate clockwise to install the new filter until the filter gasket
touches the sealing surface. Tighten the can.