Section 1: BATT Introduction
Overview
2019 BATT Diesel/Jet Fuel Operations Manual
(Version K)
1
We Engineer Solutions
Section 1: BATT Introduction
Overview
This manual covers the assembly, installation, operation and maintenance of SEI's Bulk Aviation Transport
Tank (BATT).
The BATT is approved for use in Canada under SEI Industries Ltd.'s Transportation of Dangerous Goods
Equivalency Certificate (SU 10638) from Transport Canada allowing the BATT to be used without special
permits for the transportation of jet or diesel fuels (a separate gasoline model is also available).
The BATT is limited to supplying fuel to areas with remote access or where other transportation options are
not readily available or practical. It shall be used for fuel transportation purposes only and is not intended
for long term fuel storage. The certificate also states that the fuel must be loaded into a flexible tank that
meets all the specifications of the BATT as manufactured by SEI Industries Ltd.
Warning
This manual covers BATT models that are only designed for use with diesel or Jet A fuel. There
is a separate model for use with gasoline.
Warning
The BATT is designed for the transportation of dangerous goods and its design is for limited access
operations only. No passengers are allowed during bulk fuel transport operations.
Warning
The BATT’s operational temperature range is from -46C to +50C on condition that transported fuel
temperature deviance during one operational cycle does not exceed 50C.
Caution
A copy of SEI Industries Ltd.'s
Transport of Dangerous Goods Certificate (SA 10638)
must remain
with the tank at all times during use.
