ASSEMBLY INSTRUCTIONS
HARDWARE USED
Bolt x 12
Spring Washer x 12
Flat Washer x 12
Allen Wrench x 1
Wood Dowel x 8
HARDWARE USED
Bolt x 8
Spring Washer x 8
Flat Washer x 8
Allen Wrench x 1
Wood Dowel x 8
5
3
. Insert 8pcs wood dowels (H) into predrilled
holes on side panel (2R) and middle vertical
panel (3R). Use 12pcs bolts (A) through
12pcs spring washers (B) and 12pcs flat
washers (C) to connect right front panel (5)
to side panel (2R) and middle vertical panel
(3R). Tighten bolt (A) with allen wrench (G).
Repeat with left front panels (4) and side
panel (2L) and middle vertical panel (3L).
4.
Insert 8pcs wood dowels (H) into predrilled
holes on assembled unit in step 3 as shown.
Use 8pcs bolts (A) through 8pcs spring
washers (B) and 8pcs flat washers (C) to
connect base (12) to assembled unit from
step3.
Tighten bolt (A) with allen wrench (G).
3
4
