Figure 7
USE 3PCS HINGE (F) AND 12PCS
FLAT HEAD SCREW (E) TO
ASSEMBLE TRIANGLE TOP PANEL
(8) AND TOP FRAME (5)
TOGETHER AS FIGURE7 SHOWN.
Figure 8
INSERT THE FIREBOX FROM THE
BACK OF FIREPLACE. MAKE SURE
FIREBOX IS PRESSED TIGHTLY
AGAINST THE ASSEMBLED UNIT.
ATTACH FIXED WOOD (E) ON THE
INSIDES OF FIREBOX. INSERT
4PCS FLAT HEAD LONG SCREWS
(D) THROUGH PREDRILLED
HOLES ON FIXED WOOD (8) AND
TIGHTEN INTO CORRESPONDING
HOLES ON BACK OF LEFT AND
RIGHT BACK PANELS (1). AS
FIGURE 7 SHOWN.
Figure9
NOW YOU CAN ENJOY IT.
"LINDA"CORNER FIREPLACE
Assembly Instructions
