system overview
2-7
2.1.5
Cover
Protective cover (tiltable) with plexiglass window.
2.1.6
Power supplies
Several power supplies provide voltages both to the system and the Unit Under Test (herein after: UUT).
2.1.7
Motors
Brushless and stepper motors drive probes along X,Y and Z axes.
2.1.8
Light indicator or semaphore
These device signal the system operating conditions as illustrated below.
DESCRIPTION GREEN
ORANGE
RED
System in AUTO mode, waiting for a board
for more than
40 seconds
System in AUTO mode, ready for a board
System in AUTO or MANUAL mode. The cycle is not active
(waiting for operator)
Probes in movement or there is board on board clamping
System Failure (in MAN or AUTO mode)
Green color: ON
Intermittent (0.5 seconds ON/0.5 seconds OFF)
Orange color: ON
Red color: ON
Color:
OFF
2.1.9
PC-main
Personal computer running the test software, essential to operate the system.
Summary of Contents for PILOT H4
