sole uK distributor, sealey Group.
K
empson Way, Suffolk Business Park,
B
ury st. edmunds, suffolk.
iP32 7Ar
www.sealey.co.uk
sales@sealey.co.uk
01284 757500
01284 703534
web
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
important:
no liability is accepted for incorrect use of this product.
warrantY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
s
0125 | Issue 2 21/02/17
Original Language Version
© Jack sealey limited
environmental protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment.
weee regulations
d
ispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic
Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way.
contact your local solid waste authority for recycling information.
Problem
Possible cause
solution
n
o function when On/Off Switch is operated
no power
check power supply
d
efective On/Off Switch
H
ave the On/Off Switch replaced by an
authorised service centre
slow material removal
s
anding sheet too fine or worn
fit new sanding sheet with coarser grit
scratches on workpiece after sanding
sanding sheet too coarse
f
it new sanding sheet with finer grit
not enough material removed
continue sanding
B
urn marks on workpiece
sanding sheet incompatible with material
fit correct sanding sheet
too much pressure exerted on to the sander
use less pressure whilst moving the machine
excessive dust emission
dust extraction not working; sanding sheet
not aligned
W
ith dust extraction holes in the Hook &
loop sanding
B
ase (1); extraction holes blocked
realign sanding sheet; unblock dust
extraction holes
d
ust Bag (5) full
e
mpty Dust Bag
d
ust Bag insufficient for the task at hand
connect a vacuum dust extraction system
6. trouBleshootinG
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk,
email sales@sealey.co.uk or telephone 01284 757500.
