11
USING YOUR TOASTER
1.
Put bread slice into the bread slot which can be inserted two slices at most
every time. Only the regular slice can be placed into the bread slot.
NOTE:
Make sure the crumb tray is completely positioned in place
before using.
2. Plug the power cord into the outlet.
3.
Set color control knob to your desired color. There is
7-position level,
the lowest is white and the highest is puce. The bread slice can be toasted
to golden color at the position of “
4
”.
Note:
1)
Toasting color for one side is darker than that for double bread
at the same level.
2)
If toasted continuously, toasting color for the latter bread is
darker than the color of previous cycle at the same level.
4.
Press carriage handle down vertically until it is positioned in place, the
indicator of Cancel will be illuminated, and toasting begins. Once the
bread has been toasted to the preset color, the carriage handle will be
automatically sprung up, and you can remove the bread readily.
Note:
The carriage handle can only be latched when the appliance
connects to the power supply.
5.
During the toasted process, you may observe the toasting color. If it is
satisfactory, you may interrupt the toasting process by pressing the Cancel
button at any time.
6. If the bread has been taken out from refrigerator. Set color control knob
to your desired color. Press carriage handle down vertically until it is
positioned in place, then press
DEFROST
button and the indicator of
DEFROST
will be illuminated. In this mode it will be toasted to your
desired color.
7.
If you want to reheat the cold toasted bread. Press carriage handle
down vertically until it is positioned in place, then press
REHEAT
button
and the indicator of
REHEAT
will be illuminated. In this mode toasting time
is fixed, so long as time is running over, the carriage handle will automatically
spring up and end up the reheating process.
OPERATION
Summary of Contents for SC2STW
Page 2: ......
Page 9: ...9 PRODUCT OVERVIEW...
