2-67
2
Basic oper
a
tion
Ink pack installation and replacement
8-color to 4-color mode change procedure
The procedure to change 8-color mode to 4-color mode is classified into four actions as
follow.
(1) Replace the four subcartridges with four dummy subcartridges.
(2) Remove the four ink trays and perform the cleaning twice.
(3) Set the 4-color mode's ink packs.
(4) Replace the four dummy subcartridges with the four subcartridges.
The detailed procedure is described below.
Note
If 8-color data is received during the 4-color mode, an error is notified at the host
computer side. Print operation is disabled.
–
To change the color mode to the 4-color mode, purchase the optional color replacement
set. If you do not have two subcartridges for each color (Y/M/C/K), purchase the
additional subcartridges from your dealer.
–
(1) Replace the four subcartridges with four dummy subcartridges.
1
Execute the 8-color to 4-color mode
change from the operation panel.
# C O L O R C H A N G E ( 8 - > 4 )
>
2
Loosen the two knob screws on the subcartridge cover and open
the subcartridge cover.
Subcartridge cover
Knob screws
O P E N
S U B C A R T R I D G E C O V E R
