2-75
2
Basic oper
a
tion
Ink pack installation and replacement
26
Close the subcartridge cover and tighten the two knob screws.
Subcartridge cover
C L O S E
S U B C A R T R I D G E C O V E R
27
Press the
key on the operation
panel.
S T A R T C L E A N I N G
* B O T T L E O K ?
The cleaning operation starts and the 8-color to 4-color mode change procedure is
completed.
4-color to 8-color mode change procedure
The procedure to change 4-color mode to 8-color mode is classified into four actions as
follow.
(1) Replace the four subcartridges with four dummy subcartridges.
(2) Remove the four ink trays and perform the cleaning twice.
(3) Set the 8-color mode's ink packs.
(4) Replace the four dummy subcartridges with the four subcartridges.
The detailed procedure is described below.
Note
If 4-color data is received during the 8-color mode, an error is notified at the host
computer side. Print operation is disabled.
–
To change the color mode to the 8-color mode, purchase the optional color replacement
set. If you do not have subcartridges for colors (Lm/Lc/Gy/Lgy), purchase the optional
subcartridges.
–
