2-101
2
Basic oper
a
tion
The heater initial value that is set with MEDIA REG MENU is automatically set for the
temperature of each heater. Therefore, the heater control menu is not needed normally.
The heater control menu is used to fine-adjust the heater temperature during printing or
to monitor the current heater temperature.
Heater control menu display
Press the
H E A T E R
key to display the heater control menu.
(Centigrade temperature display)
A f t 4 0 P r n 4 5 P r e 4 5
C ) 4 0 C ) + 4 0 C ) 4 5
Print heater information
Afterheater information Preheater information
Set temperature
Current temperature
The "+" mark shows heating.
(Fahrenheit temperature display)
A f t 1 0 4 P r n O F F P r e 1 1 3
F ) 1 0 4 F ) 1 1 0 F ) 1 1 3
Shows heater off.
Changing temperature using the heater control menu
