2-105
2
Basic oper
a
tion
How to use the pressure control knob
The pressure control knob is used to adjust the media pressing force of the media feeding
grid roller according to the media to be used.
Set the pressure control knob properly according to the media. The pressure force can be
adjusted to "low," "normal" or "high." The pressure control knob has four positions: "high,"
"normal," "low," and "open" used when installing media. It can be turned both clockwise
and counterclockwise.
The pressure control knob is provided on the supply side and takeup side. The pressure
force can be adjusted on the supply side or takeup side because operation of the two
pressure control knobs is interlocked.
Pressure control knobs
Takeup side
Supply side
Open
⇔
Low
⇔
Normal
⇔
High
Basically set the pressure force to “normal,” at this setting most of the media provide a
good-accuracy print. Set the pressure force to “low,” when printing on the flexible media
such as fabric banner.
–
How to use the pressure control knob
