2-124
Maintenance conducted when operating the printer after power-off for
less than two weeks
Clean the print head and the ink flow path with the cleaning liquid. Eight cleaning liquid
packs and eight dummy subcartridges are necessary for this maintenance. Prepare the
cleaning liquid kit (
P.1-10
). The cleaning liquid kit contains eight cleaning liquid packs
and eight dummy subcartridges. Use the eight cleaning liquid packs completely in a single
head wash.
<Head wash> (
P.2-61)
Select PH.MAIN MENU from the operation panel, and the select the head wash.
# I N K S Y S T E M O P T
> C L E A N I N K S Y S
After the head wash, perform CHAGE (INKPACK) to prime the ink system.
Note
To keep the print head in good condition, the printer performs the fillcap
operation automatically 72 hours after the printer enters the standby state, and
then every 3 days. The printer power should be kept on for the fillcap operation
except when the printer is not used for a long time period. To protect the print
head, do not leave the printer for more than one month with no ink charged.
Do not open or close the rear cover or lever during the service clean and head
wash. Otherwise, the operation may have to be restarted from the beginning
while wasting the ink and the cleaning liquid.
–
–
