2-125
2
Basic oper
a
tion
Periodic maintenance
<Charging ink after head wash>
To use the printer again after it is left for a certain period without printing, perform head
wash and then charge ink in the printer.
For the head wash, refer to P.2-61.
For the ink filling, refer to P.2-84.
Select PH.MAIN MENU from the operation panel, and then select CHAGE (INKPACK).
# I N K S Y S T E M O P T
> C H A R G E ( > I N K P A C K )
Insert ink trays and charge ink.
After charging the ink, leave the printer for at least one hour. Check the wiper cleaning
liquid amount. If the remaining is getting low, result it. Then perform the nozzle print. If
nozzle-out is found in the nozzle print, perform [NORMAL ALL] from PH.REC MENU.
(
P.3-49
)
Note
If an ink pack containing little ink is set, a message prompting you to replace the
ink pack appears. Set an ink pack containing more than 30% ink.
–
Maintenance conducted when the printer has been left in the power-
off state for more than one month
The service call error is displayed regardless of whether service clean has been performed or
not. Contact the sales dealer or our nearest service depot.
Note
To protect the print head, do not leave the printer in the power-off state for more
than two weeks with no storage liquid charged.
When leaving the printer for more than one month, contact the sales dealer or
our nearest service depot beforehand.
–
–
