3-35
3
Menu of oper
a
tion panel
Explanation of each menu operation
(4) EDGE GUARD
Select whether to use the media edge guard or
not. With this setting, the right and left margins of
media vary.
# U S E E D G E G U A R D
> X X : Y E S
XX: Selected media number
<Parameter (choice input)>
YES
Set when the edge guard is used.
NO
Set when the edge guard is not used.
When the edge guard is used, the right and left margins of print are 10 mm. When it is
not used, the right and left margins are 5 mm.
–
(5) MEDIA ADV MODE
Select a media advance mode.
# M E D I A A D V M O D E
> X X : F W D O N L Y
XX: Selected media number
<Parameter (choice input)>
FWD ONLY
Media is fed in the normal media advance sequence.
BACK & FWD1
Media is fed in the media adhesion prevention sequence. At the beginning
of printing, media peeling is performed during feeding when the pause
mode is cancelled.
BACK & FWD2
Media is fed in the media adhesion prevention sequence. Media peeling is
performed during feeding at each scan.
(6) MEDIA BACK MODE
Select a media back mode.
# M E D I A B A C K M O D E
> X X : B A C K & F W D
XX: Selected media number
<Parameter (choice input)>
BACK & FWD
Media is rewound after the print.
Select this mode in most cases.
FWD ONLY
Media is not rewound after the print.
When the media is flexible such as mesh media, the rewound media may
cause the media wrinkle. To prevent such a wrinkle, select this mode.
In this mode, a blank space is secured between the prints. To eliminate the
space, print the image files as one continuous image data, for example with
the tiling function of SoftRIP.
