A-2
Printer specifications
Basic specifications of the printer
Item
Specification / Function
Print method
Piezo-type color inkjet printing
Resolution
720 dpi (main scanning direction) X 360 dpi (sub scanning direction),
540 dpi X 540 dpi, 720 dpi X 720 dpi, 720 dpi X 900 dpi
Print speed
25 m
2
/h for 16-inch width at 8-path NORMAL1 mode (depending on ambient
temperature and head temperature)
Media supply/takeup
direction
Rear: Supply side, Front: Takeup side
Media type
Vinyl chloride, backlit tarpauline (FF), banner, mesh banner, cloth
Media width
Max. 104 inches (2641 mm)
Ink pack
Normal solvent ink (8 colors) (black, cyan, magenta, yellow, light cyan, light
magenta, gray, light gray)
1500 ml for each color
Noise
Standby: 45 dB (A) or less
Operating: 60 dB (A) or less (continuous sound) excluding supply/takeup motor
noise and ink charging noise
Calorific power
15552000 J/H
Guaranteed print area
Area excluding top/bottom margins (5 mm) and right and left margins (5 mm)
(When media edge guards are used, right and left margins are 10 mm.)
Power supply voltage
Printer power supply: 200 to 240 VAC, 6 A, 50/60 Hz
Heater power supply: 200 to 240 VAC, 12 A, 50/60 Hz
Input power voltage
range
Printer power supply: 180 to 260 VAC ±10%, 50/60 Hz ±1 Hz
Heater power supply: 180 to 260 VAC ±10%, 50/60 Hz ±1 Hz
Power consumption
Printer power supply: 1440 W or less
Heater power supply: 2880 W or less
External dimensions
4126 mm (W) X 1366 mm (D) X 1513 mm (H) ±10 mm
Mass
600 kg or less (excluding roll media and ink)
Print ensuring
temperature/humidity
20 to 25°C, 40 to 60%RH (no condensation)
Operating temperature/
humidity
15 to 30°C, 30 to 70%RH (no condensation)
Storage temperature/
humidity
5 to 35°C, 10 to 80%RH (no condensation)
Installation space
Min. 4926 mm (W) X 2900 mm (D) X 2200 mm (H)
Maintenance space
Min. 4926 mm (W) X 2900 mm (D) X 2200 mm (H)
Basic specifications