2-46
Adjusting the print head’s bidirectional position [BIDIRECTION
]
This function adjusts each print head’s bidirectional position, based on the print of
[BIDIRECTION
]. Note the
indicates the number 1 to 4.
Note
Before bidirectional adjustment, forcedly set the media heater to ON to warm
up the printer for 30 minutes or more. Start the bidirectional ink spotting
adjustment only after confirming that the printer is warmed up sufficiently. The
adjustment may not be performed correctly when the printer is not warmed up
sufficiently.
For the procedure to warm up the media heater forcedly, see P.2-102.
–
STEP1
Printing the test pattern for [BIDIRECTION
]
1
Set the printer to the offline state.
(Press the
O N L I N E
key.)
I N K M E D I A R E G
M E D I A M . A D V
2
Press the
M E N U
key twice to
display the menu group that
includes ADJUST.
P R I N T E R S E T U P
A D J U S T H E A T E R
3
Press the
key and the
key
to display TEST PRINTS.
# T E S T P R I N T S
> N O Z Z L E P R I N T
4
P r e s s t h e
k e y t o s e l e c t
BIDIRECTION , and press the
key.
# T E S T P R I N T S
> B I D I R E C T I O N
Select 1, 2, 3, or 4 depending on
the print mode.
5
Confirm that the TEST PRINTS are
ready.
# T E S T P R I N T S
* O K ?
6
By pressing the
key, print the
test pattern below.
# T E S T P R I N T S
> E X E C U T I N G
