●
How to adjust the length of the band
1
While pressing the push buttons on the both
sides of the flap, pull the band out of the
movable loop and fixed loop. Then open the
clasp.
Fixed loop
Movable loop
Buckle
Flap
Push button
2
Press the push buttons again to unfasten the
flap.
EN
52
6
TO PRESERVE THE QUALITY OF YOUR
WATCH
3
Pull the pin out of an adjustment hole of the
band. Slide the band to adjust its length and
find an appropriate hole. Place the pin into the
hole.
Pin
Adjustment hole
Pin
Adjustment hole
4
Fasten the flap.
EN
53
6
TO PRESERVE THE QUALITY OF YOUR
WATCH
After sales service
●
Notes on guarantee and repair
• Contact the retailer from whom the watch was purchased or SEIKO CUSTOMER SERVICE CENTER
for repair or overhaul.
• Within the guarantee period, present the certificate of guarantee to receive repair services.
• Guarantee coverage is provided in the certificate of guarantee.
Read carefully and retain it.
• For repair services after the guarantee period has expired, if the functions of the watch can be restored
by repair work, we will undertake repair services upon request and payment.
●
Replacement with functional parts
• Please keep in mind that if original parts are not available, they may be replaced with substitutes whose
outward appearance may differ from the originals.
EN
54
6
TO PRESERVE THE QUALITY OF YOUR
WATCH
●
Inspection and adjustment by disassembly and cleaning (Overhaul)
• Periodic inspection and adjustment by disassembly and cleaning (overhaul) is recommended
approximately once every 3 to 4 years in order to maintain optimal performance of the watch for a long
time. According to use conditions, the oil retaining condition of your watch mechanical parts may
deteriorate, abrasion of the parts may occur due to contamination of oil, which may ultimately lead the
watch itself to stop.
As the parts such as gasket may deteriorate, water-resistant performance may be impaired due to
intrusion of perspiration and moisture.
Please contact the retailer from whom the watch was purchased for inspection and adjustment by
disassembly and cleaning (overhaul). For replacement of parts, please specify “SEIKO GENUINE
PARTS.” When asking for inspection and adjustment by disassembly and cleaning (overhaul), make
sure that the gasket and push pin are also replaced with new ones.
• When your watch is inspected and adjusted by disassembly and cleaning (overhauled), the movement
of your watch may be replaced.
EN
55
6
TO PRESERVE THE QUALITY OF YOUR
WATCH
