4
DOUBLE REPEAT TIMER
●
Two timers are available for use either individually or in combination. When used together, Timer 2 starts counting down as soon as Timer 1 has finished
counting down the set time. They repeat their respective countdown cycles alternately as many times as necessary unless stopped.
●
Each Timer 1 and Timer 2 can be set for any desired amount of time from 10 seconds up to 99 hours, 59 minutes and 59 seconds in one-second increments.
●
To use either Timer 1 or Timer 2 as a standard repeat timer, set the timer not in use to “00:00’00.”
●
The number of times that the timers repeat their countdown cycles can be set from 1 to 100 times. If “---“ is set for the number of repeating times, the timers
will automatically start over a new counting until stopped by the user.
A
Number of times
the countdown is
to be repeated
B
D
Timer 1
Timer 2
Number of times
the countdown
was repeated
TIMER SETTING
Press to show the TIMER display.
▼
D
B
Press and hold for 2 seconds to show the TIMER SETTING display.
▼
C
Press repeatedly to select the digits (flashing) to be adjusted.
*
The HOUR digits for Timer 1 start flashing.
▼
A
Press to set the flashing digits.
*
The digits move quickly if Button A is kept pressed.
*
By pressing Button D while the digits are flashing, both of the timers and the number of times the
countdown is to be repeated will be reset to “00:00'00"” and “000,” respectively.
B
▼
After all the adjustments are completed, press to return to the TIMER display.
C
HOUR
(TIMER 1)
MINUTES
(TIMER 1)
SECONDS
(TIMER 1)
HOUR
(TIMER 2)
MINUTES
(TIMER 2)
SECONDS
(TIMER 2)
NUMBER OF TIMES THE
COUNTDOWN IS TO BE REPEATED
●
The timers cannot be set for a time less than 10 seconds. If a time less than 10 seconds is set and Button B is pressed to return to the TIMER display, the timers
will automatically be set to “00:00'10".”
How to use the timer
●
To stop the time-up warning beep and time-up beep while sounding, press either Button A, B, C or D. This will not affect the time-up beeps for the subsequent
countdown cycles.
●
The time-up beeps of Timer 1 and Timer 2 sound in different tones.
●
Restarting and stopping the timer can be repeated as many times as necessary by pressing Button C.
Press Button C to start
Timer 1.
C
mark flashes during
the countdown.
A time-up warning beep
for Timer 1 sounds 3
seconds before the set
time is up. When the set
time is up, time-up beep
for Timer 1 sounds for 5
seconds.
T I M E R 2 s t a r t s
counting down.
A time-up warning beep
for Timer 2 sounds 3
seconds before the set
time is up. When the set
time is up, time-up beep
for Timer 2 sounds for 5
seconds.
TIMER 1 starts counting
down.
In this way, both the timers repeat the countdown the number of times you have set,
showing the number of times the countdown has been completed on the display.
ALARM
●
The daily alarm sounds once at the designated time (hour, minute) every 24 hours.
●
The alarm sounds for approximately 20 seconds at the designated time and automatically stops.
●
The alarm can be engaged (on) or disengaged (off) by pressing button C.
●
Depending on which indication is selected in the TIME/CALENDAR display, the alarm time is displayed in a 12-hour or 24-hour indication.
Alarm mark
Alarm on mark
(when the
alarm is off:--)
A
B
C
D
ENGAGEMENT/DISENGAGEMENT OF THE DAILY ALARM
Press to engage (on) or disengage (off) the alarm.
C
ALARM TIME SETTING
Press to show the ALARM display.
▼
D
B
Press and hold for 2 seconds to show the ALARM SETTING display.
▼
C
Press repeatedly to select the digits (flashing) to be adjusted.
*
The hour digit starts flashing.
▼
A
Press to set the flashing digits.
*
The digits move quickly if Button A is kept pressed.
B
▼
After all the adjustments are completed, press to return to the ALARM display.
*
The alarm mark and alarm on mark will be automatically displayed.
Alarm time
Current time
MINUTES
HOUR
