En
gl
ish
En
gli
sh
46
47
Troubles
Possible causes
The STOPWATCH hands do not
return to the 0 position when the
stopwatch is reset.
Affected by external sources, or because the
internal IC had been reset, the stopwatch hand
positions have moved out of correct alignments.
Although another time zone is not
selected by using the World Time
function, the alarm/world time sub
dial time is not set at exactly the
same time as the main dial time.
The world time preliminary position
adjustment has not been performed.
Although the alarm time has been
set, the alarm does not sound at
the set time.
The alarm/world time sub dial time has been
set to another time zone than main dial time
by using the world time function.
The inner surface of the glass is
clouded.
Moisture has entered the watch because the
gasket has deteriorated.
The date changes during the day.
The time is set 12 hours ahead of or behind
the correct time.
Solutions
Adjust the STOPWATCH hands to the 0 position by following the instructions in
TIME SETTING AND HAND POSITION ADJUSTMENT.
Reset the time for main dial and alarm/world time sub dial.
Use the world time function to select the same time zone as the current time in the
main dial.
Contact the retailer from whom the watch was purchased.
Reset the time correctly, referring to TIME SETTING AND HAND POSITION
ADJUSTMENT.
• In the event of any other problem, please contact the retailer from whom the watch was purchased.
