En
gl
ish
En
gli
sh
12
13
l
How to check the position of the hands
◆
Check that the second hand moves at normal one-second intervals when the
crown is at the normal position. When the watch is stopped or the second hand is
moving at 2-second intervals, charge the watch by exposing it to light. See HOW
TO CHARGE AND START THE WATCH.
Pull out to the second
click.
t
CROWN
A
Press for 3 seconds or longer.
The stopwatch hour and minute
hands, the center hand, and the
power reserve indicator move
to the preliminar y position.
The watch is now in the hand
position adjustment mode.
Second
click
Name of hand
Preliminary position
Stopwatch hour and minute hands
(Alarm hour and minute hands/Local
time hour and minute hands)
0:00
Center hand (Stopwatch second
hand/City hand)
0 second position
Power reserve indicator
(Mode indicator)
Low level
Check that the position of each hand is
at the preliminary position by referring
to the table below.
t
• If the crown is pulled out while the stopwatch is counting, the stopwatch will be automatically
reset.
• This operation can be performed both in the POWER RESERVE DISPLAY mode and the
STOPWATCH mode.
◆
If any hand is not correctly positioned, adjust it by carrying out the procedure on the
following page.
◆
When all hands are correctly positioned, move on to the procedure for “Time
settings for main dial and alarm/world time sub dial.”
▲
Center hand
Power reserve
indicator
Stopwatch hour and
minute hands
