En
gl
ish
En
gli
sh
12
13
●
How to check the position of the hands
◆
Check that the second hand moves at normal one-second intervals when the crown
is at the normal position. When the watch is stopped or the second hand is moving
at 2-second intervals, charge the watch by exposing it to light. See “HOW TO
CHARGE AND START THE WATCH.”
Pull out to second click.
t
CROWN
A
Press for 2 seconds or longer.
T h e s t o p w a t c h h o u r a n d
minute hands, the stopwatch
second hand, and the power
reserve indicator move to the
p r e l i m i n a r y p o s i t i o n . T h e
watch is now in hand position
adjustment mode.
Name of hand
Preliminary position
Stopwatch hour and minute hands
(Alarm hour and minute hands)
0:00
Stopwatch second hand
(Calendar hand)
0 second position
Power reserve indicator
(Day hand/Mode indicator)
Low level
Check that the position of each hand is
at the preliminary position by referring
to the table below.
t
• If the crown is pulled out while the stopwatch is counting, the stopwatch will be automatically
reset.
• If the crown is pulled out while the alarm is set, the alarm will be automatically canceled.
• This operation can be performed both in the CALENDAR/ALARM mode and STOPWATCH
mode.
◆
If any hand is not correctly positioned, adjust it by carrying out the procedure on the
following page.
◆
When all hands are correctly positioned, move on to the procedure for “Time
settings for main dial and alarm sub dial.”
▲
Second
click
Stopwatch
second hand
Power reserve
indicator
Stopwatch
hour and
minute hands
