73
TIME MODE
● Time setting procedures include hand settings of the main watch and small
watch to the current time.
● The hands should be correctly aligned to the 0 position (initial position) before
starting to set the time. If they are not correctly aligned to the 0 position, it
is necessary to correct their alignment before setting the time. To correct the
hand alignment, refer to HAND POSITION ADJUSTMENT（→ P.98）
.
●How to set the time (main watch and small watch)
Pull out to second click when the small
second hand is at the 12 o'clock posi-
tion.
The small second hand will stop on the
spot.
Small second hand
MODE SELECT
TI
M
E
5
6 1
0
TMR CHR A
LM
L
O
C
CROWN
※ If the crown is pulled out while the timer or
stopwatch is measuring time, the measure-
ment will be forcibly terminated and the
timer or the stopwatch will be reset.
72
With each press of button
Ⓐ
, the mode indicator turns in the following order to
show the selected mode.
※ While any one of the timers among 5-minute, 6-minute, 10-minue in the YACHT TIMER mode or
the timer in TIMER mode is measuring, you cannot use another timer at the same time. There-
fore, the mode indicator will not move to indicate any other timer modes unless it is stopped.
TI
M
E
5
6 1
0
TMR CHR A
LM
L
O
C
TI
M
E
5
6 1
0
TMR CHR A
LM
L
O
C
TI
M
E
5
6 1
0
TMR CHR A
LM
L
O
C
TI
M
E
5
6 1
0
TMR CHR A
LM
L
O
C
TI
M
E
5
6 1
0
TMR CHR A
LM
L
O
C
TI
M
E
5
6 1
0
TMR CHR A
LM
L
O
C
TI
M
E
5
6 1
0
TMR CHR A
LM
L
O
C
TI
M
E
5
6 1
0
TMR CHR A
LM
L
O
C
TIME mode
YACHT TIMER mode
(5-minute timer)
YACHT TIMER mode
(6-minute timer)
YACHT TIMER mode
(10-minute timer)
TIMER mode
STOPWATCH mode
ALARM mode
LOCAL TIME mode
※ When the mode changes to the TIME mode
from the LOCAL TIME mode, the mode indica-
tor turns counterclockwise.
71
MODE CHANGE
T
IM
E
5
6 1
0
TMR CHR A
LM
L
O
C
CROWN
A
CROWN
A
Pull out to fi rst click.
Press to set the mode indicator pointing
at your desired mode.
Upon completion of selecting the de-
sired mode, push back in to normal posi-
tion.
Mode indicator
70
CROWN
There are two types of crown, a normal crown and a screw-lock type crown.
Please check the type of the crown of your watch.
Normal crown
Screw-lock type crown
Pull out the crown and operate it.
The
crown
turns.
The crown
does not turn.
(It cannot be
turned any
further.)
While pressing
the crown
in, turn it in
the direction
indicated by
the arrow.
※If your watch has a screw-lock type crown, the crown screws into the watch to prevent malfunction and increase water resistance.
※Be careful not to screw the crown in by force as it may damage the slots of the crown.
Unlock the crown before operating it.
Unscrew
After operating the
crown, lock it.
While pressing the
crown in
Screw
