77
※Only one yacht timer can be used at one time.
※ You cannot change the selected timer while it is working.
To change the timer, it is necessary to stop the currently
working timer fi rst, and then change to another.
※ When the timer is changed to another timer, the previously
selected timer will be automatically cancelled.
Yacht timer starts
(button A)
Stopwatch automatically starts when the timer
finishes counting down.
5'00"
Elapsed time
Yacht timer operation
Yacht timer
Stopwatch
After 12 hours, the stopwatch
automatically stops.
※ The illustration below shows the operation of yacht timer using a 5-minute yacht timer
as an example.
76
YACHT TIMER MODE
◆ Yacht timer combines the functions of a count down timer and a stop watch
that starts operating automatically when the timer fi nishes counting down. This
function is particularly useful in yacht racing.
●Yacht timer operation
Upon activating the yacht timer function, the selected yacht timer starts
counting down in 1-second increments.
The remaining time is indicated by the center hand and the two hands of the
small watch, which turn counterclockwise while the yacht timer is counting
down.
When the yacht timer fi nishes counting down, the beep will sound indicating
that time is up and the measurement is automatically switched to the stop-
watch.
The stopwatch can measure 12 hours in 1-second increments. When the
measurement reaches 12 hours, the stopwatch automatically stops.
75
◆Date setting should always be carried out after the time is correctly set.
◆ Manual date adjustment is required on the fi rst day after a month that has less
than 31 days: February, April, June, September and November.
●How to set the date
Pull out to fi rst click.
Turn clockwise to set the date.
※ While you are setting the date, do not press either
button
Ⓐ
or
Ⓑ
, as pressing button
Ⓐ
or
Ⓑ
while
the crown is at the fi rst click position can change
the mode and the settings in some modes.
※ Do not set the date during any time between 9:00 P.M.
and 1:00 A.M. Date setting during this time period
may cause failure of date change on the following day.
Push back in to normal position.
2
CROWN
CROWN
CROWN
74
Turn to set the time of the main watch.
※ The moment the date changes is midnight.
When setting the hour hand, be sure that
AM/PM is set correctly.
※ While doing so, set the minute hand 4 to 5
minutes ahead of the correct time, and then
slowly move it back to the exact minute(s).
Press to set the time for the small watch.
With each press of button
Ⓑ
the small
watch hands will advance 1 minute.
Pressing and holding button
Ⓑ
will ad-
vance the small watch hands rapidly.
MODE SELECT
TI
M
E
5
6 1
0
TMR CHR A
LM
L
O
C
Upon completion of all settings, push
back in to normal position simultaneously
with a time signal.
Small watch
Hour hand
Minute hand
B
CROWN
CROWN
B
