101
TO PRESERVE THE QUALITY OF YOUR WATCH
100
Press to turn the mode indicator a full cir-
cle.
Press to set the mode indicator pointing
at the TIME mode, which is the initial po-
sition of the mode indicator.
Keep pressing to fast-forward.
※ Set the mode indicator exactly pointing at
the dot marker.
A
B
※After hand position adjustment is carried out, it is necessary to set the time.
Refer to ● How to set the time（→ P.73）.
MODE SELECT
TI
M
E
5
6 1
0
TMR CHR A
LM
L
O
C
Upon completion of all settings, push
back in to normal position.
dot marker
MODE SELECT
TI
M
E
5
6 1
0
TMR CHR A
LM
L
O
C
Mode indicator
A
B
99
Keep pressing for approximately 5 sec-
onds. The small watch hands start mov-
ing.
Press to set the small watch hands to 12
o'clock, which is the initial position of the
small watch hands.
Keep pressing to fast-forward.
Press to turn the center hand a full circle.
Press to set the center hand to the 0 po-
sition.
Keep pressing to fast-forward.
A
B
A
B
Small watch
Center hand
A
A
B
B
98
HAND POSITION ADJUSTMENT
(mode indicator, center hand, hands of the small watch)
◆ Hand position adjustment is a procedure required when the hands are not cor-
rectly aligned for use in the STOPWATCH or TIMER functions, or after the bat-
tery is changed or the built-in IC is reset. For example, when the hands are not
pointing to the 0 position even after the stopwatch is reset. After hand position
adjustment is carried out, it is necessary to set the time.
Pull out to second click.
The small second hand will stop on the
spot.
※ If the crown is pulled out while the timer or
stopwatch is measuring time, the measure-
ment will be forcibly terminated and the
timer or the stopwatch will be reset.
● How to adjust the positions of the mode indicator, center hand
and the hands of the small watch
MODE SELECT
TI
M
E
5
6 1
0
TMR CHR A
LM
L
O
C
CROWN
