105
● The case back shows the caliber and performance of your watch
WATER RESISTANT
10
BAR
7N01-0B40 R2 AG
W
AT
ER R
ESISTANT
10
BA
R
7N
01-0B40
A
G
R2
Water resistant
performance
Magnetic resis-
tant performance
Caliber
Number
Refer to "Water
resistance"(→ P.106).
Refer to "Magnetic
resistance"(→ P.110).
The number to identify
the type of your watch
※The figure above is one example. Performance of your watch is different from above sample.
104
DAILY CARE
●The watch requires good daily care
・Do not wash the watch when its crown is at the extended position.
・Wipe away moisture, sweat or dirt with a soft cloth
・ After soaking the watch in seawater, be sure to wash the watch in clean pure
water and wipe it dry carefully.
※ If your watch is rated as "Non-water resistant" or "water resistant for
everyday life," do not wash the watch. Do not pour running water directly
from faucet onto the watch. Put some water into a bowl first, and them soak
the watch in the water to wash it.
Performance and type → P.105
Water resistance → P.106
●Turn the crown from time to time
・ In order to prevent corrosion of the crown, turn the crown from time to time.
・ The same practice should be applied to a screw-lock type crown.
Crown → P.70
103
・ Periodic inspection and adjustment by disassembly and cleaning
(overhaul) is recommended approximately once every 3 to 4 years in order
to maintain optimal performance of the watch for a long time. According
to use conditions, the oil retaining condition of your watch mechanical
parts may deteriorate, abrasion of the parts due to contamination
of oil may advance or delay the time significantly, or the watch itself
may stop. As the parts such as gasket may deteriorate, water-
resistant performance may be impaired due to intrusion of perspiration
and moisture. Please contact the retailer from whom the watch was
purchased for inspection and adjustment by disassembly and cleaning
(overhaul). For replacement of parts, please specify "SEIKO GENUINE
PARTS." When asking for inspection and adjustment by disassembly
and cleaning (overhaul), make sure that the gasket and push pin are also
replaced with new ones.
When your watch is inspected and adjusted by disassembly and cleaning
(overhauled), the movement of your watch may be replaced.
●Inspection and adjustment by disassembly and cleaning (overhaul)
102
AFTER SERVICE
・ Contact the retailer from whom the watch was purchased or SEIKO
CUSTOMER SERVICE CENTER for repair or overhaul.
・ Within the guarantee period, present the certificate of guarantee to
receive repair services.
・ Guarantee coverage is provided in the certificate of guarantee. Read
carefully and retain it.
・ For repair services after the guarantee period has expired, if the functions
of the watch can be restored by repair work, we will undertake repair
services upon request and payment.
●Notes on guarantee and repair
・ SEIKO makes it a policy to typically keep a stock of replacement parts for
this watch for 7 years. Replacement parts are those which are essential
to maintaining the functional integrity of the watch. Please keep in
mind that if original parts are not available, they may be replaced with
substitutes whose outward appearance may diff er from the originals.
●Replacement parts
