50
Normal Charging
Before connecting the AC adapter, install the battery pack in the printer.
(1)
Ensure that the printer power is off.
(2)
Install the battery pack in the printer.
(3)
Connect the AC cable to the AC adapter.
(4)
Plug the DC plug of the AC adapter to the power connector of the printer.
(5)
Plug the AC plug of the AC cable to an outlet.
(6)
The printer turns on automatically.
After the POWER LED displays the battery remaining capacity for approximate 3 seconds, the
POWER LED changes to orange, and then charging starts.
During charging, the POWER LED lights on orange.
(7)
When the charging is successfully complete to full charge, the power is shut off automatically.
In case that a battery error occurs during charging, the ERROR LED displays the error status.
When it happens, the power is not shut off automatically.
Figure 15-1 Normal Charging by AC Adapter
3
4
5
1
2