51
Long Life Charging
After connecting the AC adapter, install the battery pack in the printer.
When the battery pack has already been installed, remove it from the printer.
(1)
Ensure that the printer power is off.
(2)
Connect the AC cable to the AC adapter.
(3)
Plug the DC plug of the AC adapter to the power connector of the printer.
(4)
Plug the AC plug of the AC cable to an outlet.
(5)
Install the battery pack to the printer.
(6)
Turn on the printer.
After the POWER LED displays the battery remaining capacity for approximate 3 seconds,
the POWER LED turns orange and charging starts when the battery remaining capacity is battery
level 2 or less.
When the battery remaining capacity is battery level 1, the POWER LED stays displaying the battery
remaining capacity, and charging does not start.
During charging, the POWER LED lights on orange.
(7)
When the charging is successfully complete to full charge, the POWER LED turns to green.
The power is not shut off automatically.
In case that a battery error occurs during charging, the ERROR LED displays the error status.
Figure 15-2 Long Life Charging by AC adapter
2
3
4
1
5
6