52
HINT
•
The printer can print or receive data while charging by the printer and AC adapter.
During printing, the POWER LED displays the battery remaining capacity continuously
and the printer pauses charging.
After printing is completed, the printer resumes charging, and the light of the POWER
LED changes to orange.
When the printer performs printing or receiving data during charging with the normal
charging method, the power is not shut off automatically even when charging is
completed.
•
To stop charging, press the power switch to turn off the power.
To resume charging, press the power switch again.
For the long life charging method, please note that further charging will not be continued if
the remaining capacity of the battery pack has recovered to the battery level 1 at the time
of charge resumption.
•
When resuming charging by the above procedure during normal charging, the charging
method is switched to the long life charging method, and therefore the power is not shut
off automatically even when charging is completed. To resume charging with the normal
charging method, turn off the printer, then unplug the AC plug of the AC adapter from the
outlet, and plug it again.
•
The charging time depends on the ambient temperature and the voltage level of the
battery pack. Normally, it takes about 4 hours to complete charging after running down
the battery pack.
•
The AC adapter may get hot when in use. This is normal and not a malfunction.
