The Day Advance Time refers to
the time when printing shifts to the next line on a time
card for the next day
. This function enables the punch out time record to print on the same
line of the previous working day even if leaving time is after midnight.
The clock default is "5:00".
21
21
Setting the Day Advance Time
1
In case of the example, push the + or -
button to set the hour at "7" and then
push the SET button. At that moment,
the flashing will change from "Hour"
to "Minute".
In case of the example, push the SET
button because the minute is not to be
changed. At that moment, the display
will stop flashing and the setting is
now completed.
4
Push the SETTING END button to
get out of the setting mode.
Turn the key to "L" position. Make
sure "date" and "time" are indicated on
the display and "colon" is flashing.
Then replace the cover.
DAY ADVANCE
TIME
DAY ADVANCE
TIME
Date
Colon
DAY ADVANCE
TIME
Minute
Hour
Before you start setting, make sure to see "Preparation for Setting".
E
xample
Change the Day Advance Time from 5:00 to 7:00.
Push the FUNCTION button for 1
second, and position the " " under the
"DAY ADVANCE TIME" mark.
" " mark can be moved by
FUNCTION button.
A flashing number can be changed.
SET
FUNCTION
SET
FUNCTION
SET
FUNCTION
2
Change the "Hour".
3
Change the "Minute".
Summary of Contents for Precision QR-6550
