Once the password is set, you are requested to enter the current password before changing
any setting. If the password you entered does not coincide with the setting, you cannot
change the setting values.
You can select any 4-digit number from 0001 to 9998 as your password.
9
41
Setting the Password
1
4
Push the SETTING END button to
get out of the setting mode.
Turn the key to "L" position. Make
sure "date" and "time" are indicated on
the display and "colon" is flashing.
Then replace the cover.
Colon
Date
PASSWORD
SET
FUNCTION
SET
FUNCTION
SET
FUNCTION
PASSWORD
PASSWORD
Before you start setting, make sure to see "Preparation for Setting".
E
xample
Set the password "1234".
2
1
Push the FUNCTION button for 1
second, and position the " " over the
"PASSWORD" mark.
" " mark can be moved by
FUNCTION button.
A flashing number can be changed.
In case of the example, push the + or -
button to set at "12" and then push the
SET button. At that moment, the
flashing will change to the last two
digits.
Set the first two digits.
3
Next, push the + or - button to set
at "34" and then push the SET
button. At that moment, the display
will stop flashing, and the setting is
now completed.
Set the last two digits.
All settings must be reset if you forget the password. Refer to "7. RESETTING".
N
ote
Numbers "0000" and "9999" are not valid as password.
Summary of Contents for Precision QR-6550
