Once the password is set, you are requested to enter the current password before changing
any setting.
42
2
How to Change Settings When the Password Is Set
1
Push the FUNCTION button for 1
second. Then, "9999" will be indicated
on the display and the first two digits
flash.
A flashing number can be changed.
2
In case of the example, push the + or -
button to set at "12" and then push the
SET button. At that moment, the
flashing will change to the last two
digits.
3
In case of the example, push the + or -
button to set at "34" and then push the
SET button. At that moment, the " "
mark is located under "CARD TYPE".
4
Select desired setting mode by
pushing the FUNCTION button. Then
make any changes as explained.
If you want to change any
"DATE/TIME" settings, push the
DATE/TIME button in Step 1
instead. After entering the
Password, the display will be as
shown in the left figure and then
make any changes as explained.
SET
DISPLAY
HOURS
SET
FUNCTION
SET
FUNCTION
SET
FUNCTION
Before you start setting, make sure to see "Preparation for Setting".
E
xample
The current password is "1234" and go into the "FUNCTION" setting mode.
Enter the first two digits.
Enter the last two digits.
DATE / TIME
CARD
TYPE
SET
FUNCTION
N
ote
Summary of Contents for Precision QR-6550
