11. TROUBLESHOOTING
Error No. appears
Contact the store from whom you bought the
unit.
Correctly insert the time card.
Insert a correct type of card.
Make sure that another time card is not jamming
in the time recorder. Try to insert the time card
again.
Contact the store from whom you bought the
unit.
Make sure that another time card is not jamming
in the time recorder and the ribbon cassette is
correctly inserted in place.
After making sure of the above, close the cover.
In case the card is completely stuck in the unit
and does not come out, open the front case and
remove a ribbon cassette first. Then, slide the
card downwards and take it off from the button of
the unit.
Also check whether the correct card type is
selected.
Make sure that another time card is not jamming
in the time recorder and the ribbon cassette is
correctly inserted in place.
After making sure of the above, close the cover.
Input the correct password you set. (4-digit
numbers)
Correctly set the daylight saving time.
Check the setting contents and input the correct
figures.
Check the barcode area whether it is smudged or
damaged.
Check whether the time was turned back or not.
Also check whether the card was inserted within
1 minute after the last punch.
Check whether the day's 6th column was already
used.
Also check whether you can print if you change a
time card or the day changes.
CPU error.
The remaining life of lithium battery for
memory back-up is short.
The front and back of the time card inserted is
wrong.
Inserted time card was wrong type.
The card is not pulled in properly.
RAM error.
Clock will not work.
Card sensor error.
Printing cannot be performed.
The printer motor or sensor is not normal.
Inserted time card was wrong type.
The card is stuck in the time recorder.
Printing cannot be performed.
The printer motor is not normal.
Password error.
The start date and the end date of the daylight
saving time are the same date.
Input the wrong figures.
Can’t use the time card.
(QR-6560)
Punch error (punch time error).
(QR-6560)
Punch error (punch logic error).
(QR-6560)
E-00
E-01
E-03
E-04
E-05
E-10
E-12
E-15
E-30
E-35
E-38
E-40
E-41
E-49
E-50
E-51
E-52
No. Error contents Action
*If the error number is still displayed, contact the store from whom you bought the unit.
2
52
Summary of Contents for Precision QR-6550
