10
I-5321-4
2
-
3
操作
2-3
Operation
①
“AC(U11)”、“DC(U15)”、
“ O U T P U T ( U 9 ) ” の 3 つ の
ブレーカを全て「ON」にしてください。
文字盤照明用ランプ(黄色)が点灯します。
①
Please turn all three breakers of "AC (U11)", "
DC (U15)", and "OUTPUT (U9)" on.
The LED lamp (yellow) for the dial illumination
will be on.
② 下記の初期設定画面が表示されます。
②
The following initial screen is displayed.
SHUT OFF
PUSH ANY KEY
「0.5秒子時計」‥‥停止
0.5sec secondary clock
・・・・
stop
「30秒子時計」 ‥‥停止
30sec secondary clock
・・・・
stop
いずれかのキーを押してください。
次の項目に進みます。
Push any key to go to the next step.
電源投入時もしくは停電復帰時には、この
表示になります。
また、RESTARTを押した後も同様
ですが、ただしその場合は、以後、各入力
待機状態において、直前に保持していた
情報を表示します。
When the power is turned on, or resumed after
power failure, or RESTART is pushed, it becomes
this display.
In case of RESTART operation, it will display the
data right before the restart button is pressed.
③ 下記の画面が表示されます。
③
The following screen is displayed.
ADJ 0.5CLK TO UT
PUSH ANY KEY
「0.5秒子時計」‥‥停止→手動調整
0.5sec secondary clock
・・・・
stop
→
Manual adjustment
「30秒子時計」 ‥‥停止
30sec secondary clock
・・・・
stop
全ての「0.5秒子時計」の針を、「UT」を
スタートさせる時刻に、手で合わせておきま
す。
Synchronize the position of the hour, minute and
second hands of 0.5sec secondary clock before
starting UT.
「UT」をスタートさせる時刻は、子時計
の針位置合わせに要する時間を考慮して
決めて下さい。
「秒針付き30秒子時計」は、秒針のみ
合わせてください。
Please set the time of UT as considering the
operation period to adjust the hand position of all
secondary clocks.
Please set the second hand only for "30sec.
secondary clock with second hand".
針位置合わせが終わりましたら、いずれかの
キーを押してください。
次の項目に進みます。
Push any key when the setting of hand position
finished.
Go to the next step.
Summary of Contents for QC-6M5
Page 25: ...25 I 5321 4 EXTERNAL VIEW...
Page 26: ...26 I 5321 4 MASTER SECONDARY RS 422 NMEA0183 RS 422 NMEA0183 RS 232C...
Page 29: ......