background image

English

1

1

English

NOTE ON POWER SUPPLY

●  

The  battery  used  in  this  watch  is  a  rechargeable  battery,  which  is  different 

from ordinary silver oxide batteries. Unlike other disposable batteries such as 

dry-cell  batteries  or  button  cells,  this  rechargeable  battery  can  be  used  over 

and over again by repeating the cycles of discharging and recharging.

●  

The  capacity  or  recharging  ef ficiency  of  the  rechargeable  bat ter y  may 

gradually  deteriorate  for  various  reasons  such  as  long-term  use  or  usage 

conditions.  Worn  or  contaminated  mechanical  parts  or  degraded  oils  may 

also  shorten  recharging  cycles.  If  the  efficiency  of  the  rechargeable  battery 

decreases, it is necessary to have the watch repaired.

CAUTION

 

To unscrew the crown:

 

Turn the crown counterclockwise.  (Then, pull it out for time/date setting.)

 

To screw in the crown:

 

With the crown at the normal position, turn it clockwise while pressing it.

HOW TO OPERATE THE SCREW LOCK TYPE 

CROWN (for models with screw lock type crown)

  Do  not  remove  the  rechargeable  battery  yourself.  Replacement  of  the 

rechargeable  battery  requires  professional  knowledge  and  skill.  Please 

ask a watch retailer for replacement of the rechargeable battery. 

  Installation of an ordinary silver oxide battery can generate heat that can 

cause bursting and ignition. 

Summary of Contents for V14J








Reviews: