④
SOLAR CELL
⑤
HOLDING RING FOR DIAL
* It is not necessary to separate the SOLAR CELL and the HOLDING RING FOR DIAL except in the case
that a part needs to be replaced.
• Disassembling and Reassembling of HOLDING RING FOR DIAL
<Disassembling>
1. The HOLDING RING FOR DIAL is fixed to the movement by the
hooking portion at 4 o’clock and 11 o’clock positions.
2. Insert the tip of a screwdriver into the gap between the hooking
portion and main plate as shown with arrow marks in the
illustration to release the hooking portion from the main plate.
<Reassembling>
1. Set the 2 hooking portions to 4 o’clock and 11 o’clock positions
as shown in the illustration.
2. Gently push the hooking positions of HOLDING RING FOR
DIAL so that they catch the main plate securely.
TECHNICAL GUIDE
Cal. V172A/V174A
11/25
REMARKS ON DISASSEMBLING AND REASSEMBLING THE MOVEMENT
3
SPACER FOR SOLAR CELL
Set the notched portions of the SPACER FOR SOLAR CELL to
the guide posts (5 posts) of the HOLDING RING FOR DIAL, and
check that the dial is fixed in position.
• How to install
