Seip UK 100, Installation Instructions Manual

1

.

You have unpacked your UK garage door 
opener and have it in front of you.

2.

Take the part designated with a 

2

 in the drawing,

and place it in front. Slide the C-profile coupling 
piece over part 

2

 all the way home. 

Part 

1

 and part 

2

 are now connected

with one another.

3.

When mounting part 

3

, make 

absolutely sure not to twist the chain!

Chain

                                                                        Leave the C-profile coupling piece so that

protrudes about 10mm (0,4 ") past part 

2

. Then

take part 

3

 and set it in the C-profile coupling 

piece at an angle, inserting it from above as 
shown. To tension the chain, press down on 

part 

3

.

4.

Push the C-profile coupling piece forward as far as it will go, 
then screw in at least one fixing screw to secure it.

5.

If you want to impart even greater stability to your C-profile rail, then 
screw in all of the supplied fixing screws.

      The chain has been pretensioned in the factory; do not change the chain tension!

Preassembly

Installation Instruction UK 

 -  

Page 2

1

2

3

1

2

3

1

2

3

2

3

1

Let the C-profile

coupling piece

protrude (by 10mm)

To

tension

chain

2

3

10 mm

10 mm