6
Head Office 36 Shinike, Terada, Joyo, Kyoto Pref. 610-0192 Japan
Phone +81 774 55 8181 Fax +81 774 58 2034
Tokyo Branch Yanagibashi First Bldg., 2-19-6 Yanagibashi, Taito-ku, Tokyo 111-0052 Japan
Phone +81 3 5833 8946 Fax +81 3 5833 8971
BANGKOK REP. OFFICE 2 Jasmine City Building, 17th Floor, Sukhumvit Soi 23 (Prasarn Mitr),
Sukhumvit Road, Klongtoey Nue, Wattana, Bangkok 10110
Phone +66(0)2-
204
-
5143
CHINA OFFICE
No.8,Xuzhou Road,Changshu,Jiangsu 215500,China
Phone +86 512 5284 9957
1.
Prior to
installation, be
sure to turnoff the power.
2.
Confirm that the screws and bolts are fastened properly and tightly.
3.
When installing the fitting
,
be sure to connect external wires inside a specified part of the
fitting. Don’t o
pen any other part.
4.
The supply voltage variation should be within±6%of the rating.
5.
The lighting fitting must be used in a location where it can be used safely according to its flameproof protection type
(indicated on the
body).
6.
Be sure to use certified Ex components to plug the entries of the terminal box which are not used.
7.
For the cable gland
,
be sure to use a certified Ex component.
8.
Be sure to use Ex component certified products and cables which are suitable for the operating temperature range
,
referring
to the
following.
Plug
：
-20°
℃
to+85
℃
Cable gland
：
-20
℃
to+85
℃
Cables
：
-20°C to+85°
℃
9.
Confirm that the fitting is adequately grounded.
10.
Prior to maintenance or inspection
,
be sure to turnoff the power.
11.
Don't use the product in a corrosive gas atmosphere which contains hydrochloric acid
,
high-concentration chlorine gas
or the like.
12.
To prevent shortening of the service life
,
avoid turning on the fitting indirect sunlight.
13.
To avoid noise or malfunctioning
,
don't use a radio
,
television or wireless infrared remotecontrol near the fitting.
14.
After turning off the power
,
wait atleast ten minutes before opening the main
body. An
explosion might result.
15.
The product must be mounted on a sturdy wall or structure which is virtually vibration-free and less susceptible to damage.
Otherwise
,
it might fall or be damaged.
16.
Locking bolts of strength class A 2-50 are used on the main
body. Never
remove
them. A
fire
,
electric shock
or explosion might result.
17.
Repair of the flame path is not intended in the special condition of safe use in the instruction manual.
18.
The purchaser should make the manufacturer aware of any External effects or Aggressive substances that the equipment maybe
exposed to.
19. Don’t move the product only holding the guard, please move it carefuuly.
CAUTIONS
CONTACT
SEIWA ELECTRIC MFG. CO., LTD.
■
For further information on the product, contact our offices below (let us know the model name indicated on
the nameplate).
Summary of Contents for WLZAA14021
Page 7: ...7 ...
