A
C
E
F
B
D
E
G
Parts List
Basket Assembly
2
Parts:
A.
2 Piece Basket
B.
Extension tubes (2)
C.
Riser tubes (2)
D.
Front riser/Light Mounting
Plate
E.
Clamp (4)
F.
Bumper Mount
G.
Roll cage mounts (L,R)
Locking Bolt
Hardware:
(8) M6 x 16mm Button Head Bolts
(1) M6 x 30mm Button Head Bolt
(1) M6 x 35mm Button Head Bolt
(12) M6 Flat Washers
(10) M6 Lock Nuts
(2) M8 X 30mm Hex Head
(4) M8 Flat Washers
(
2
)
M8 Lock Nuts
(2)
Metal Spacers
1
. Assemble two sides of rack (A). Secure the larger rear tube
with an M6 x 35mm Socket Head bolt and lock nut. Secure the
front smaller tube with an M6 x 30mm Socket Head bolt and
lock nut.
2
. Insert an Extension Tube (B) in each end of the hood rack.
Push in just a few inches and tighten the locking bolt in the end
of the tube just enough to hold the extending tube in place. You
will make a final adjustment and tighten later.
M6x35mm
M6x30mm
M6x16mm
M8x30mm
M6x20mm
