Getting to know your system
b. Test Strip
Contact Bar: Insert it into strip port. Push it all the way until it goes
no further.
Top Edge: Apply blood sample here.
Confirmation Window: Sample checking area.
Important: the meter should only be used with BS-102 test strips.
Using other Test strips with this meter can produce inaccurate results.
Important Test Strip Information
• The system has an operating range of 10
℃
~40
℃
(50
℉
~104
℉
).
• Store the test strip package in a cool, dry place between 1
℃
~30
℃
(33.8
℉
~86
℉
)
.
• Use test strips only within the system operating temperature range.
• Keep away from direct sunlight or heat.
• Store your test strips in their original vial only; never transfer them to
another vial or any other container.
• Never store individual test strips outside the vial.
• After removing a test strip from the vial, immediately close the vial cap
tightly.
• With clean, dry hands, you may touch the test strip anywhere when
removing it from the vial or inserting it into the meter.
• Do not use test strips beyond the expiration date. This may cause
inaccurate results.
• Do not bend, cut, or alter test strips.
Warning: The cap or vial contains drying agents that may be
harmful if inhaled or swallowed and may cause skin or eye
irritation.
8
Contact Bars
Top Edge
Confirmation Window
32
