Getting
to
know
your
system
Specimen Application Area
- After strip is inser ted into the Strip
Channel, apply a blood drop to the center of test strip. The Specimen
Application Area is visible from the front and the back of the Test Strip.
Insert Arrows
- Located on the front of the test strip, the arrows show
the direction in which the test strip should be inser ted.
Important:
the meter should only be used with HS-101 test strips.
Using other test strips with this meter can produce inaccurate results.
Specimen Application
For best results, fill the Specimen Application Area with approximately
10 µL of blood specimen. Incorrect results may occur if the specimen
is not applied correctly, or if the Specimen Application Area is not filled.
After applying the specimen, ensure the Specimen Application Area is
completely covered. The Specimen Application Area should remain
covered throughout the entire test. If the Specimen Application Area is
not covered, or if there is too much specimen covering the Specimen
Application Area, repeat the test with a new test strip.
c. Test Strips
8