TPS_ED1401-ENIT
46
Automatic Change Over System
Commutatore automatico di media tensione
ACO is an automatic change over system for automatic control
and management of sources in the secondary distribution network
to ensure maximum service continuity, e.g. in case the voltage
disappears on the line in service the ACO switches to the reserve
line.
ACO system needs a voltage presence signal from each incoming
ACO unit. This signal can be detected by means of VTs or by HV
sensor (voltage presence indicator), code “ TPSA025201”
ACO è un sistema di commutazione automatica per la gestione
ed il controllo di reti in media tensione, ed assicura la massima
continuità di servizio; per esempio commutando automaticamente
sulla linea di riserva alla mancanza delle rete elettrica principale.
Per il sistema ACO è necessario un segnale di presenza tensione
da ogni modulo di arrivo del sistema, prelevato da TV o dal Ns.
accessorio “TPSA025201 = Dispositivo di segnalazione presenza
tensione da capacitivo”
Automatic Operating Mode Example
Esempio di Funzionamento Automatico
Normal Line
Linea Normale
ON
OFF
Reserve Line
Linea di Riserva
ON
OFF
N line switch
Sezionatore Linea N
ON
OFF
R line switch
Sezionatore linea R
ON
OFF
Start up of the diesel generator
Avvio gruppo elettrogeno
ON
OFF
Time(s)
- Tempo(s)
2
3 X
2 5
X
For other solutions contact us
Per altre logiche di funzionamento contattare SEL
ACO
SYSTEM
N
R
Normal Line (N)
HV Sensor (TPSA025201)
Reserve Line (R)
Linea Normale (N)
Segnalazione presenza Tensione
Linea Riserva (R)
M
M