background image

OPERATING MANUAL

36

5. STORAGE AND TRANSPORTATION

The device must be stored in heated storage facilities pursuant to GOST V9.003–80 (ГОСТ 

В9.003–80). The following conditions must be maintained:

1) ambient temperatures from + 0 to 50°С;

2) relative air humidity 80 percent at 30°С;

3) atmospheric pressure from 630 to 820 mmHg;

4) absence of acidic, alkaline, or other aggressive vapours.

The device can be transported in standard packaging by any suitable means of conveyance 

(in a pressurised module, if transported by plane) as long as it is protected from atmospheric 

moisture.  While  transporting  the  device,  avoid  dropping  or  otherwise  subjecting  it  to  strong 

impacts.  During  transportation,  the  mechanical  conditions  must  comply  with  medium  level 

requirements per GOST В20.57.310–76, while the ambient conditions must correspond to those 

specified by GOST В9.003–80 for open-air storage.

6. WARRANTY

The manufacturer guarantees compliance of every manufactured item with all the requirements 

as per technical specifications, within 12 months of the date of purchase.

During the warranty period, the manufacturer guarantees free of charge repairs of the device, 

its auxiliary components and accessories, up to full replacement.

Free  repairs  or  replacement can only  be  claimed if  the user  has  observed  all the rules  of 

operation, transportation, and storage of the device, and on condition that the device itself and 

its ancillary parts are free from mechanical damage, and upon submission of a properly filled out 

warranty coupon.

Upon expiry of the warranty period, post-warranty servicing is available from the manufacturer.

The warranty does not cover batteries.

Summary of Contents for ST 400 Cayman

















Reviews: