INSTRUCTION MANUAL CODE 80303 REV B
Sep2019
(It can be modified without notice) Page: 18
J
.P. SELECTA s.a.u. Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España Tel 34 937 700 877 Fax 34 937 702 362
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
8.1 Language
When entering this setting, screen Fig 8.1 appears. Use the
Up/Down
arrows
to select the language you want to appear in all menus.
Press the
BACK
key to return to the settings menu or the
HOME
key to return
to the initial screen.
8.2 Date/Time
Screen Fig 8.2 appears when you enter this setting. Click on the parameter to
be modified and use the
Up/Down
arrows to select the corresponding value.
Press the
BACK
key to return to the settings menu or the
HOME
key to return
to the initial screen.
8.3 Units
When entering this setting, screen Fig 8.3 appears. Use the
Up/Down
arrows
to select the parameter from which you want to change the unit.
Fig 8.3.1 shows the screen for selecting the temperature units. By using the
Up/
Down
arrows you select between ºC and ºF. If this value is changed, all displayed
values will be referenced to this unit.
Press the
BACK
key to return to the settings menu or the
HOME
key to return
to the initial screen.
8.4 Brightness
When entering this setting, screen Fig 8.4 appears. Use the
Up/Down
arrows
to select the brightness percentage of the screen.
Press the
BACK
key to return to the settings menu or the
HOME
key to return
to the initial screen.
Fig. 8.1 Language selection
Fig. 8.2 Date / Time selection
Fig. 8.3 Units selection
Fig. 8.3.1 Temperature unit selection
Fig. 8.4 Setting the screen brightness