MANUAL DE INSTRUCCIONES
CODIGO 80170 REV F
02/2021 Pag. 23
J
.P. SELECTA s.a.u.
Autovía A2 Km 585.1 Abrera 08630 (Barcelona) España
Tel (34) 93 770 08 77 Fax (34) 93 770 23 62
e-mail: selecta@jpselecta.es - http://www.grupo-selecta.com
10.
Keeping door open at 90°, suspend in top square pin.
WARNING!
It is essential that the door is open at an angle of 90° during instal-
lation.
If the door is installed in the closed position, this will lead to destruc-
tion of the self-closing mechanism on the first opening and closing
of the door.
IMPORTANT
As a result of its heavy weight, the door must be held secure by one
person.
11.
Fit the hinge components on the hinge bracket.
12.
Install the hinge bracket with the fitted hinge components in the lower
door mounting.
Note
The tabs on the bearing ring must fit into the recesses of the door mounting
during installation.
If necessary, gently rotate the upper ring.
13.
Screw hinge bracket into place.