Step 2
Install
Headrail
Step 3
Attach Louvers
Step 4
Attach Cord
Weight
Mount
brackets,
then snap
on headrail
as illustrated.
To remove
headrail, simply
push the release
lip up with a
screwdriver.
Push the louver into the
top of the hook, then
pull straight down to
lock in place. Attach
groover the same as
above, only ensure
that excessively thick
insert material does
not go inside the hook.
If the cord weight
is notattached to
the cord, install it
as shown.
To remove the
cord weight, apply
sufficient force to
release the pulley.
Rev. 4/04
Shortening the Cord Length
Find the cord connector in front of the leading carrier. Loosen
the cord screw. Find the cord that comes directly from the
gearbox, and pull cord out until the cord weight lifts to the
desired position. Tighten the cord screw, test the traversion,
and cut off the excess cord.
With Fabric Louvers
Slide bottom weights into the pockets. Clip on the linkchain as
illustrated. Ensure that you avoid tangling the cord.
Valance Clip
Bracket
Outside Mount
Valance Clip
Inside Mount
Ceiling or
Window Well
Valance
Install Valance
With Outside
Installation
Install Valance
With Intside
Installation
With ceiling mounts, simply
install the headrail bracket
clip mounting screw through
the valance as shown.
Make sure the louver will
not hit the valance.
Snap the valance clip onto
the top of the headrail.
Slide valance into the valance
clip. Assemble corner
returns as shown. The returns
may need to be trimmed to
length. Use heavy duty scissors
or shears.
Thank
you
for
choosing
®
Step 5
Test Traverse
Step 6
Test Rotation
Alternately pull the cords
to see that the blind
traverses smoothly in
both directions.
CAUTION: ONLY
TRAVERSE THE BLIND
WITH THE LOUVERS
IN THIS OPEN
POSITION!
By pulling the beaded
chain once in each
direction you will
rotate the louvers
from front to back.
This will automatically
align all of your louvers.
Valance
Valance Corner
Valance Clip
Bracket
Outside Mount
Valance Clip
Inside Mount
Ceiling or
Window Well
Valance
Install Valance
With Outside
Installation
Install Valance
With Intside
Installation
With ceiling mounts, simply
install the headrail bracket
clip mounting screw through
the valance as shown.
Make sure the louver will
nothit the valance.
Snap the valance clip onto
the top of the headrail.
Slide valance into the valance
clip. Assemble corner
returns as shown. The returns
may need to be trimmed to
length. Use heavy duty scissors
or shears.
Thank
you
for
choosing
®
Step 5
Test Traverse
Step 6
Test Rotation
Alternately pull the cords
to see that the blind
traverses smoothly in
both directions.
CAUTION: ONLY
TRAVERSE THE BLIND
WITH THE LOUVERS
IN THIS OPEN
POSITION!
By pulling the beaded
chain once in each
direction you will
rotate the louvers
from front to back.
This will automatically
align all of your louvers.
Valance
Valance Corner
Valance Clip
Bracket
Outside Mount
Valance Clip
Inside Mount
Ceiling or
Window Well
Valance
Install Valance
With Outside
Installation
Snap the valance clip onto
the top of the headrail.
Slide valance into the valance
clip. Assemble corner
returns as shown. The returns
may need to be trimmed to
length. Use heavy duty scissors
or shears.
Step 6
Test Rotation
By pulling the beaded
chain once in each
direction you will
rotate the louvers
from front to back.
This will automatically
align all of your louvers.
Valance
Valance Corner
Mount the
brackets on the
headrail then
snap in place,
as illustrated.
To remove
headrail, simply
push the release
lip up with a
screwdriver.
For free hanging lou-
vers, push the louver
up into the carrier
stem, then straight
down to lock in place.
Channel panel louvers
attach the same way,
just make sure that
excessively thick
insert material does
not go inside the
carrier stems.
Pull the beaded chain
once in each direction,
rotating the louvers from
front to back. This step
will automatically align
all of the louvers.
Alternately pull the cords to
ensure that the blind traverses
smoothly in both directions.
CAUTION: DO NOT
TRAVERSE THE BLINDS
WITH THE LOUVERS IN
THE CLOSED POSITION
For ceiling mounts, install
the headrail bracket clip
mounting screw through the
valance as shown. Make
sure louvers do not hit the
valance.
Snap the valance clip onto
the top of the headrail. Slide
valance into the valance clip.
Assemble valance returns as
shown. Returns may need to be
trimmed to fit length using a
heavy duty scissors.
Step 3
Install Headrail
Step 5
Test Traverse
Step 6
Test Rotation
Step 4
Attach Louvers
Basic Valance Installation
Valance with returns
Installation
WARRANTY: Prestige Vertical Blinds are
backed with a Limited Lifetime Warranty
which does not cover normal wear and tear,
improper installation, abuse or other items
outside of Prestige Window Fashions control.
The louvers have a three year warranty.
Louvers may gradually lose color after long
exposure to the sun and are not covered by
the warranty. Freight and packaging to and
from our facility is not covered under the
warranty and is the customer's responsibility.
