Control Remoto Inteligente Universal
5
6.Check the function of the keys on remote control. If
most keys on your new remote control do not function
correctly, try another 3-digit device code (e.g. 004…)
from the list under the same brand. Repeat steps 3 to 6
until all the basic functions operate correctly.
Once you satisfy the code, that means you have already
got correct set up for the device.
Remark:
1.To leave set up mode, press the device key (e.g. TV).
Or if you do not actuate any keys within 10 seconds it will
be automatically terminated.
2.You may have set up more than one device on the new
remote control. Before you operate your new remote
control, please press the requested device key first (e.g.
TV), so the remote control is surely at the proper device
status, otherwise it may control the wrong device which is
not you’re requested.
B.
Set up by Automatic Search:
If setting up by brand name and codes is unsuccessful, or
you can not find your brand name in the list, you can use
the “Automatic Search” to find the correct code for your
remote control.
1.Switch on the device that you like to control. If it is a
video recorder, insert a video cassette.
2.Point the remote control at your device. Press the SET
and the device (e.g. TV) keys simultaneously and hold
them down for 3 seconds. Then the device key flashes,
that means it is in Automatic Search now.
3.The OFF signal is automatically transmitted to the
device from the remote control (code scan). Once the
device (e.g. TV) switches off, immediately press any key
(except SET key) to stop the Automatic Search.
4.Switch the device on again by pressing the “POWER”
key. Check the function of the other keys on the remote
