www.selectronix.us
Selectronix, Inc.
(425) 788-2979
SLC4075 TouchScreen Gateway Installation & Operating Manual
___________________________________________________________________________________________________
7
Warnings And Advisories
!!! WARNING !!!
This equipment should be installed, adjusted, and serviced by qualified electrical maintenance personnel familiar with
the construction and operation of the equipment and the hazards involved.
FAILURE TO OBSERVE THIS PRECAUTION COULD RESULT IN BODILY INJURY!
This control is an operating device, not a limiting device. It is the responsibility of the user to install all limiting and
safety devices to the end-item system. The system software controls many critical functions, such as maintaining set
points, enabling and disabling multiple boilers.
For any critical safety-related limits, or enable/disable functions, the end-user shall install hardware limiting devices
and cutout switches, as applicable.
The circuitry in this equipment contains static-sensitive electronic components. Observe proper handling precautions
when handling the printed wiring boards. Avoid contacting components without first discharging your body to earth
ground. Always disconnect power to any of the electronic assemblies before making electrical interconnect or
input/output wiring. Failure to observe this precaution could result in damage to the circuitry.
The printed circuit assemblies contain sharp leads on the back side of the board, which may be avoided by handling
the assemblies by the board edges.
!!! WARNING !!!
The Selectronix Building Management Interface allows remote write access to various data points via BACnet or
Modbus. It is the end-user’s responsibility to determine which data points are allowed to be changed, and which user
may perform this action. Red Lion’s Crimson software provides comprehensive security features to qualify user’s
access. Refer to the Crimson User’s manual available at
www.redlion.net
.
This system contains software from 3
rd
party vendors which is configurable by the OEM, the integrator, and the end-
item user over which Selectronix has no control. The delivered software is provided “As Is” without warranty of any
kind. Selectronix disclaims all warranties, whether stated, implied or statutory, for merchantability or fitness for a
particular purpose. Selectronix does not warrant that the functions contained in the supplied system will be error-
free, or that all errors or defects are capable of being corrected. The end-user is solely responsible for verification of
its design and suitability to the application.
This system is not designed or intended to be applied in a fail-safe system, such as life-support.
In no event shall Selectronix be liable for any loss of profits, loss of data, loss of configuration, or cost of procurement
of substitute goods or services, or installation or labor charges.
