background image

 

    115     

 

before it turned off its power (“RECORD”, “TRANSMIT”, or to the initial mode). This function is 
very useful when you have installed the Self-Guard in the remote places far away from you. In 
the case that you have installed the Self-Guard in remote places, and there happens an 
electricity failure for some time and the electricity gets available to the Self-Guard again, then 
you have to go to where the Self-Guard is placed to turn it on, and to set it to the “RECORD” or 
“TRANSMIT” modes. But the Self-Guards have this “automatic recovery function”, and free the 
users from the burden. 

 

z

 

Self-Guard’s image from the camera or recorded images are blurred.   

 

It may happen when there is dust or other particles on the camera lens, so you should carefully 
wipe out those dust and other particles at times with the rolled up soft fabrics or tissue. 

 

z

 

I cannot go into magnification mode.

   

   

You can only go into magnification mode in the case that “OPTION” mode 

 “OHERS” 

 “EXT 

MON SET” 

 “MON OUT” is set to off. 

 

z

 

Audio gets interrupted when playback a file.   

 
This happens because Self-Guard records audio when there is a motion. If you want to record 
audio irrespective of motion detection, then turn on “AUDIO DET”. (“OPTION 

 “OTHERS” 

 

“POWER SET” 

 “AUDIO DET”) This may result a large file size because Self-Guard will 

record audio regardless of motion detection from the camera when audio detection function is 
turned on.   
 

z

 

I cannot make the Self-Guard to record. 

   
Set the Self-Guard to its default set. (“OPTION 

 “OTHERS” 

 “DEFAULT SET”)   

Summary of Contents for SG-1000





















































































































Reviews: